Articles by Matt

Although we are excited about this new web site where we can sell quality parts at reasonable prices, we will continue to sell through our ebay parts store for those of you who prefer that format....

You may want to find out more about our shop at www.ruttersrodshop.com. At that web site you will see lots of photos and information that may interest you. Be sure to check it out!

It is taking us longer to make product entries on this site than we had hoped. PLEASE BE PATIENT and DON'T GIVE UP ON US! If you would like to purchase a specific part that you have in mind, just...

To our dismay, we recently discovered that many of your emails were not getting sent to us! We apologize if you did not receive a reply from us in a timely manner. Please try again the next time...

You will be glad to know that we are working diligently to keep our costs as low as possible in order to offer you the best prices for quality parts! There is nothing worse than putting time and...

We set up a booth at the Charlotte Goodguys Event at the end of October. There was a very good turn out and the weather was perfect. Usually this event is cold and rainy so the sunshine was a...

In case some of you have been looking for our Rutter's Parts ebay store, we should let you know that we recently discontinued that venue. Even though we held a 100% Positive Rating as an ebay Power...

"You provide what most of us need regardless of our experience level, great advice on what works and what doesn't, what is needed and what isn't. That sets you apart from all the places that just...

Hello folks!! Just wanted to take a minute to introduce myself and give you a little info about what's going on here at the Rutter's Parts site. I am Ken Creel, and I am very happy to have joined...

Visit our booth at the Goodguys 20th Southeastern Nationals in Charlotte, NC at the Charlotte Motor Speedway from October 25th to the 27th. You will find us in the Sprint Building with the '73 Cuda...

Just wanted let everyone about a promotion that RideTech has going for the month of October. From 10/01/13-10/31-13 Buy any pair of Smooth Body Shocks and receive a FREE! RideTech T-Shirt and FREE!...

Some of you may already know from viewing our Facebook Page that we have moved our shop to a new location. The new 7000 sq. ft. facility will suit our needs just fine with a 1500 sq. ft. parts...

Thank you all for your patience as we adjust and tweak our new revised web site. It has taken many hours to prepare the site so it is user friendly yet very informative and fun to look at. I know...

We've just been chosen to be an exhibitor in the 2014 NSRA Nat'ls Builder's Showcase in Louisville, KY! We are honored to be one of the many builders who will highlight and show off their...

Drive your hot rod and help us celebrate our NEW LOCATION! No entry fee. No trophies. Just fun and friends. Register your pre '79 vehicle by 10:30 am on day of event to be eligible to win...

Next week we head to Louisville, KY for the NSRA Nationals. We are excited about taking the 1931 Chevy owned by Tom Wollenberg of NC, built and painted at Rutter's Rod Shop to display in the...

'Thanks for your fast shipping of the Haywire Pro T wiring harness. It's going to work great on my '53 Chevy truck!', said Glenn Foster of Kress, TX. 'Thank you for your professional service...

Wanted in Hickory, NC - Rutter's Rod Shop, a street rod, classic, and muscle car builder is looking for a responsible full time shop technician with knowledge of aftermarket parts and experience in...

We want to welcome Mike Hawley to Rutter's Rod Shop as our parts go-to-guy! Mike has extensive knowledge of the best hot rod parts. He also has personal experience with aftermarket installations...

That's right! We have decided to make that long arduous 3 hour trek over to Raleigh to attend the Goodguy's Rod and Custom show. We will be there in our 1937 Ford panel truck. Please stop by and say hello.

Rutter's Rod Shop had a great time attending the First Ever Goodguys Raleigh Event last weekend (4-17/15 to 4-19/15). It got off to a slow start since attendance was pretty low on Friday but...

NC Tilting and Registration Bill 820 Some of you have stopped into the shop to let us know that you are still having trouble with your local DMV regarding titling your old car(s). Bill 820 was...

Recently I was chatting with one of our customers who's having us do some work on his car. We were reviewing what has been done so far and what's still left to do when I asked, "How did you come...

We can't really refuse to take our latest build, the turn-key '56 Nomad owned by Jim Chapin to the 2020 Detroit Autorama! The show is February 28, 29, and March 1. If you're able to attend the...

We took Jim Chapin's 1956 Nomad to the 2020 Detroit Autorama in February and are pleased to announce that it took first place in its class! We are stoked about this and Jim is ecstatic! He drives...

This 1963 Ford Falcon (pictured below) recently rolled into our shop. We are excited to install this sick Coyote Gen. 3 motor (pictured below) and a 10 speed automatic transmission into this beauty...

Rutter's Rod Shop is looking for an entry level technician to join the team that has been building award winning street rods and muscle cars for over 24 years. You must be self driven and ready...

During a recent process of improvement, we completed a routine system re-evaluation which has shown us some new ways we can improve our services. One improvement we’ve made is to upgrade the...

ANNOUNCEMENT! Starting next week, Monday, 4/18/22, we will have new business hours. We will be open Monday through Thursday, from 7 am to 6 pm (lunch from 12-1). We will no longer be open on...

The shop has gone through some changes in the last few months, and we have been doing some hiring. Creed is our newest addition to the Rutter's team! We want to give Creed a massive thank you for...

Ed Fausel, Event Manager for Charlotte Motor Speedway based in Concord NC, visited our shop yesterday. We gave him the grand tour! We spoke to Ed about all of our current projects as well a...

Are you trying to figure out which part from us is best suited for your needs? If so, Cristy is the one to call! You can contact her via email at sales@ruttersrodshop,com, by filling out our form...

Due to current supply chain shortages from the manufacturers, it will probably take longer to receive your parts' orders than usual. We've posted the turn-around times for many of our manufacturers...

Jim Chapin's '56 Nomad was featured as a WINNER!

 

Rutter's is proud to sponsor the 3rd Annual Cars for a Cause Car Show at Holy Family Catholic Church in Clemmons, NC on September 30th, 2023. Come meet our staff, see some cool cars, and win a Rutter's t-shirt!